ARS NOTES. HK
SPECIAL WEAPONS SW5


(updated 10-06-2009)



Page Outline




Introduction

Arizona Response Systems frequently is asked to fix hack jobs produced by low quality companies. Generally, I refuse. Not only is there the liability issue, but also I value my time too much to waste it wading through substandard parts and workmanship. I did accept a pair of Special Weapons SW5s in for refinish only, and was so disgusted by what I saw that I documented the mess. I know the appeal of an HK MP5 style rifle is strong. They are definitely cool, and factory guns run $3000-$3500, which is probably outside the price range of many folks. Potential buyers should consider that the disappointment and disgust of low quality, shabby work remains long after the inconvenience of high price is forgotten.

Special Weapons, or "Speshul Wepunz" as is they are commonly called in the industry, is a bottomfeeding company in Mesa Arizona, famous for low quality products and dishonest business practices. The owner, Todd Bailey, has been banned from every major firearms board in the US. Other companies linked to Tod Bailey include:

  • Tactical Weapons Training Academy
  • Cohaire Arms
  • Cohaire Ordnance Factory
  • Omega Arms
  • Special Weapons
  • Acme Parts
  • BCH Manufacturing
  • Top Notch Accessories

In a world where businesses thrive on name recognition, there can still be legitimate reasons to create new names. For example, Taco Bell, Pizza Hut, and Kentucky Fried Chicken were all owned by Pepsi Company. Cinnibon and Chevy's Mexican Restaurant were owned by Taco Bell. I suspect Mr. Bailey's motivation is less to identify separate subsidiaries, but to disguise the ownership. He wants to continue selling the same garbage, but knows that the horrible reputation he has earned under other names makes marketing the same junk difficult. By making a new name, he can pretend to be someone else. Bobcat Weapons claims to be unrelated to Special Weapons, but a search of the Arizona Department of State Trade Names database shows the same address for both companies. A chain-link fence dividing a room may make a legal separation, but for all practical purposes, they are one and the same. Hmmm .. . .. .

Update. Andrew Bonas of Bobcat Weapons has moved to his own facilities and renamed the company Red Rock Arms.

Back to top




Review

ARS, Review, SW5 rifle & receiver

ARS, Review, SW5 rifle & receiver
What kind of harsh industrial stripping agents did this to these two separate receivers? A bucket of paint thinner. Yes, thats right, nothing more aggressive than 5 minutes in Home Depot paint thinner made this ghastly spray paint finish come right off. While some may ask "Isn't paint thinner designed to remove paint?" Sure - if it Krylon rattle-can paint. Which is precisely why reputable firearms manufacturers use heavy-duty epoxy, teflon, moly, or ceramic based paints. If this paint wipes off with paint thinner - imagine what would happen with cleaning solvents designed to remove powder and copper residue.
ARS, Review, SW5 rifle & receiver I have refinished HK rifles for almost 15 years. This is the first time I've seen a hackjob as blatant as this magazine catch. If the magazine won't fit, there is a problem to address - you don't "fix" it by grinding correct, in-spec parts.
ARS, Review, SW5 rifle & receiver A diamond in the rough. The Special Weapons SW3 US made cocking handle is an excellent all-steel copy of the original rubber and steel factory part.
ARS, Review, SW5 rifle & receiver This peeling paint on the trunion is from before I cleaned the gun.
ARS, Review, SW5 rifle & receiver A factory unit has the axle pins flush with the sides of the trigger mechanism housing and flat on the ends. All the axle pins in an HK trigger mechanism housing are the same width - that is, the same as the width of the housing. The SW5 pins (A) seem to be randomly cut from dowel pins. This shoddy detail work is typical of Special Weapons Products. The clearance cut for the semiauto shelf (B) is adequate. Quality manufacturers, however, copy the factory unit by welding a plate to cover this cut. The plate gives lateral rigidity to the trigger mechanism housing. Note that SW left the bare metal from the cut open to corrosion - they didn't even bother to refinish the unit after cutting on it. The weld at (C) however was never dressed down. This prevents the trigger mechanism housing from fitting into the grip frame without pounding it in and splaying the grip frame walls outward.
ARS, Review, SW5 rifle & receiver When converting a standard fullauto trigger mechanism housing to semiautomatic, a pin must be installed in the housing to limit trigger sweep. While the SW pin is functional, the complete lack of finish work is indicative of what you can expect from the company.
ARS, Review, SW5 rifle & receiver Why would SW run this part of the trigger mechanism housing across a belt sander to reduce it smaller than the factory unit? Simple - the sloppy welds on the rest of the unit prevent it from fitting properly. I guess it was easier to grind down a correct area than to fix the incorrect ones.
ARS, Review, SW5 rifle & receiver The bolt carrier is another fine example of why Special Weapons has earned a reputation as the bottom-feeders of the industry. Apparently, due perhaps to welding the cocking tube on crooked (or welding through the cocking tube, leaving a ridge inside), the bolt carrier wouldn't fit. But again, instead of correcting the problem, they just ground down a correctly dimensioned part to make it fit. Disgusting.

Back to top




Summary

Perhaps after examining the product closely, you will understand why I choose not to work with any products from Special Weapons, Todd Bailey, or any of his front companies.

Back to top