METACOL Tech Specs

METACOL III is phenolic resin classified as a bonded, solid-film lubricant. It contains molybdenum disulfide in a keytone carrier for decreasing friction. 

Fluid Immersion Testing*

Fluid Duration
MIL-S-3136 (Standard Test Fluid-Hydrocarbon) 24 hours
MIL-G-5572 (Aviation Gasoline, Grade 115/145) 24 hours
MIL-H-5606, MIL-H-8446 (Hydraulic Fluid) 24 hours
MIL-L-6082 (Lube Oil), MIL-J-5624 (Jet Fuel, JP-4) 24 hours
MIL-R-81294 (Remover, Paint, Epoxy System) 24 hours
Trichlorethylene, Dow Corning DC-550 24 hours
Nitric Acid 10%, Hydrochloric Acid 10% 24 hours
Hydrogen Peroxide 3% 48 hours
Ammonium Hydroxide 10% 1 hour
Sodium Bisulfide 3% 30 Days
Alkaline, Highly Chelated at 212ºF 2 hours
Salt Spray 1,000 hours
Accelerated Marine Atmosphere Exposure Equivalent 30 Years
Sea Water Immersion 60 Days

*These are minimum PASS / FAIL standards, METACOL III exceeds these minimums.

Additionally Tested Specs

TestResult
Abrasion Resistance: Tabor Abrasurf #CS10 wheel @ 500 gram weight235 revolutions minimum
Durability: machine-gun dry firing test after 60-day sea-water immersion.PASS
Cold Resistance: – 125ºF1000 hours minimum
Heat Resistance: 500ºF1000 hours minimum
Extreme Heat: Thermal Breakaway at 1000ºFminimal
© 2022, T. Mark Graham, Arizona Response Systems, LLC. All rights reserved.